Page 29
Alterations reserved
Operating Manual
Stand 10/2006
SBAP 46/72/82-ME USA
5 2.3
Marking device
>NOTICE<
This device enables you to
exactly count and displace
1
batches to
each other in the desired number of
pieces to ensure the continuous take-off
of equally sized batches.
The desired number of pieces of
products of each batch must be entered
into the
IVO
– batch counter
9
; see the
separately attached „
IVO
“ Operating
Manual.
If
9
does not exist, the marking device
will be controlled over the batch counter
of the folding machine. (see operating
manual „folding machine“)
Install a photocell
3
above the sheets.
Functioning check: The diode will light
up if a sheet is passing the photocell.
As soon as the pre-selected number of
pieces of one batch is reached you
should displace the round belts to the
left or right side through the electro-
magnet
5
and marking bars
6
.
>NOTICE<
You should place the
photocell in such a way that it is not
influenced by the marking bars
6
.
Do not reach into rotating shafts!
