44
6. Unfasten four screws to remove the cover L and the upper cover L together.
7. Unfasten four screws to remove the paper guide L.
8. Unfasten either of the screws to remove the guide shaft from the joint arm.
Then unfasten a screw to remove the presser and the ball bearings.
9. While spreading the case horizontally, pull upward on the two rollers to remove them.
404 [Upper Cover L]
4-NC3x6
417 [Cover L]
414 [Paper Guide L]
4-NC3x6
(On the back
side of the metal
plate)
HS4x12, LW4
Several flat washers may
be inserted for height
adjustment purposes.
317 [Presser], NC3x5
(Likewise on the opposite side)
Two pieces of 313 [Ball Bearing]
(Likewise on the opposite side)
243 [Guide Shaft]
(Lower it to remove it from the
joint arm.)
240 [Joint Arm]
Two
rollers
Spread
Spread
Pull upward
