40
3-24 Replacing the Timing Belt
1. Following the steps in
3-1 Replacing the Outer Covers
, remove the front cover, the rear cover,
the side cover L, and the side cover R.
2. Unfasten three screws to remove the lower bracket.
(Perform the same process on the opposite
side.)
3. Following the steps in
3-9 Adjusting the Cushion Piece
, remove the cushion piece.
4. Unfasten four screws to remove the paper feed motor together with the bracket.
5. Unfasten four screws to remove the stay. (Perform the same process on the opposite side.)
4-S3x8, SW3, W3
298 [Bracket]
113 [Paper Feed Motor]
411 [Lower Bracket], 3-M3x6
205 [Stay]
4-M4x8
Do not unfasten
this screw.
