23
6. After the replacement, take the reverse steps to reassemble the product.
Perform a clinching trial. If there is any problem with the shape of the staple, adjust the left-
right position at which the joint arm is attached and repeat it until the problem is resolved.
List of Components
No.
Name
Qty.
240
Joint Arm
1
109
Connector Catch
1
243
Guide Shaft
2
HS4x12
Inner Hexagonal Hole Screw
2
LW4
Flat Washer (small)
2
Loosen the left and right hexagonal hole screws to adjust the position.
Paper insertion direction
The joint arm is displaced leftwards.
The joint arm is displaced rightwards.
The joint arm is at the correct
position.
