14
3-7 Replacing and Cleaning Clincher Pieces
<Replacing Clincher Pieces>
1. Power the product on and switch the clincher mode to Loop. Then power the product off.
2. Unfasten the screws to remove pieces.
3. After the replacement, take the reverse steps to reassemble the product.
After the replacement, perform a clinching trial. If there is any problem with the shape of the
staple, reattach the piece in the opposite direction.
<Cleaning Clincher Pieces>
Clean the depressed part of the piece with a swab or a soft cloth.
List of Components
No.
Name
Qty.
01-005
Piece
5
S3x4
Small Countersunk Head Screw 10
5 pieces of 275
5 pieces of 2-
S3x4
Reverse the orientation and reattach the piece.
