MBM FC-10, Service Manual

Page: 32 / 45

31
Note: The error output of the collator is a transistor output.
Transistor operation Voltage output Current Remarks
ON 0 V Flow A current of up to 50 mA can be caused to flow.
OFF OPEN No flow A voltage of up to 30 V can be applied.
9. Changing the error input method (System constant y-2)
When various after processing machines including a booklet maker are connected, there is the case that it
may be necessary to reverse the error input method of the collator side depending on the after processing
machine because the error output operation is fixed. Operating the system constant y permits reversing the
error input method of the collator.
Indication
Counter Contents of indication
Operation Remarks
1000 digit y
－
100 digit
Paper ejection response input
method
“2” key
10 digit
Error input method
“3” key
1 digit
Error output method
“4” key “1”: Error at 5 V
“0”: Error at 0 V
Note: The error input of the collator is pulled up to 5 V. Accordingly, when no device is connected, 5 V is
input.
10. Changing the paper ejection response method (System constant y-3)
When the after processing machine is connected, there is the case that it may be necessary to reverse the
paper ejection response input method of the collator side depending on the after processing machine
because the paper ejection output operation is fixed. Operating the system constant y permits reversing the
paper ejection response input method of the collator.
Indication
Counter Contents of indication
Operation Remarks
1000 digit y －
100 digit
Paper ejection response input
method
“2” key
“1: Ready at 5 V
“0”: Ready at 0 V
10 digit
Error input method
“3” key
1 digit
Error output method
“4” key
Note: The paper ejection response input of the collator is pulled up to 5 V. Accordingly, when no device is
connected, 5 V is input.