9
・
Loading paper with the printed side down in Alternate
mode
3.4 Loading paper in Insert and Program mode
(1) Insert mode
Load partitioning paper on the top station to be used. For
instance, if 10 stations are used continuously top to bottom,
partitioning paper should be loaded on Station 1.
(2) Program mode
Be sure to load paper with the printed side up.
For example, when 10 stations to be used continuously top to
bottom, front covers should be loaded on Station 1, back
covers on Station 10.
If fewer than 10 stations are used, load front covers on the
top station, back covers on the lowest of those to be used.
4. RESPONSE TO LIT AND FLASHING LAMPS
(ERROR MESSAGE)
Counter
display
Other display
Possible cause
Corrective Action
CHECK lamp and the relevant
station lamp light green
They light when checking is
completed.
Use the machine as they are.
Station lamp lights red. JAM
lamp and the relevant station
lamp light flashes red.
Paper remains in the paper feed
photo sensor.
Remove the paper shielding the
photo sensor.
EJECT lamp lights/flashes red.
Paper remains in the paper stacking
photo and full stacking photo
sensor.
Remove the paper shielding the
photo sensor.
DOOR lamp lights red/flashes
red.
Back door is open.
Close the back door.
ERROR(L) lamp lights
red/flashed red.
Trouble is occurring at the left side
optional equipment.
Remove the trouble at the left
side equipment.
Number
of count
or Err
ERROR(R) lamp lights
red/flashed red.
Trouble is occurring at the
equipment connected at the right
side.
Remove the trouble at the right
side equipment.
Summary of Contents for FC-10
Page 2: ... 1 1 ...
Page 14: ...13 6 WIRING DIAGRAM ...
Page 15: ...14 7 CIRCUIT BOARD DIAGRAM 7 1 Operation board ...
Page 16: ...15 7 2 Speed control circuit board ...