manualshive.com logo in svg

MBM E-METRO, User Manual, Page: 27 / 33

Share
Download
MBM E-METRO User Manual Download Page 27

E-METRÒ

 USER MANUAL

p.27

8.3.2  Lubrication and chain tension control

It is important to clean and lubricate the chain to prevent corrosion from atmospheric agents.
1. Clean the entire length of the links with a rag.
2. Spray all the links with a special grease in spray for transmission chains. 

CORRECT LUBRIFICATION OF THE CHAIN

Be careful not to let the lubricant run on 

the brakes or tires of the bicycle. This can 

lead to the occurrence of serious injuries!!

DANGER

Verify the correct tension of the chain by placing the cam- bio in 
the two different extreme positions allowed by the pinion pack

8.3 Weekly maintenance and checks

8.3.1  Washing and cleaning

Cleaning the pedal assisted bicycle is not only a matter of decorum, but also allows you to immediately detect any defect 
in it.
In order not to damage or compromise the functioning of the various components, especially the electrical parts, cleaning 
must be carried out taking certain precautions. It is absolutely forbidden to direct jets of pressurized water towards the 
electrical parts, the engine and the battery, for which washing with a sponge is recommended.
Before starting the pedal-assisted bicycle, dry completely with low pressure compressed air and check that there is no 
residual moisture on the electrical components.

8.3.3  Checking the frame and bolts

The supporting frame of the pedal assisted bicycle and the welds must be free of visible defects such as: cracks, defor-
mations, incisions, corrosion, etc. Make sure that all the bolts on the pedal assist bike are tight.

Summary of Contents for E-METRO


































Reviews:

No comments