manualshive.com logo in svg

MBM E-METRO, User Manual, Page: 26 / 33

Share
Download
MBM E-METRO User Manual Download Page 26

E-METRÒ

 USER MANUAL

p.26

8. MAINTENANCE

8.1 General features

To maintain the full functionality of your pedal assisted bicycle for a long period, it is necessary to carry out maintenance 
as prescribed, with correctness and professional skills.

RISK OF INJURY

During all maintenance work, follow the appropriate safety measures. In this regard, refer to the information on p. 10. All 

maintenance operations must be carried out with the battery disconnected from the pedal-assisted bicycle and from the bat-

tery charger and the bicycle resting in a stable manner, using special support elements.

DANGER

8.2 Daily maintenance and checks

8.2.1  Control of plates and pictograms

Check the legibility and presence of the CE plate, and of the warning stickers
affixed to the bodywork of the bicycle.

8.2.2  Wheel control

Using the special inflation valve on the rims, check the inflation pressure of the tires using a 
compressor and a gun with a pressure gauge, or a pump. Check the condition of the tread, the 
rim and the attachment of the rims to the hubs. In the event of a tire replacement, contact your 
authorized dealer or a qualified tire dealer.

8.2.3  Brake operation check

The brakes must be adjusted in such a way as to ensure effective braking and at the same time the control levers must 
have adequate travel, in order to modulate the braking: in other words, the brakes must not be too slow or too tight.

Fine adjustment of the brakes

Adjustment of the brakes must only be carried out by authorized personnel.

ATTENTION

Do not inflate the tires beyond the allowable value 

indicated by the manufacturer on the side surface of the 

tires.

Summary of Contents for E-METRO


































Reviews:

No comments