E-METRÒ
USER MANUAL
p.14
3.8.3 BATTERY CHARGING
Recharging the battery of the pedal assisted bicycle can be carried out with the battery assembled on the vehicle or re-
moved from it. In particular, proceed as follows:
1- Turn off the assistance system of the pedal-assisted bicycle using the appropriate button “M” (Ref. L - Figure 6);
2- Remove the battery in case you want to charge the battery separately;
3- Lift the rubber cap on the appropriate battery charging socket, located on the left side of the same (Figure 10);
4- Connect the supplied battery charger to the socket with the appropriate plug;
5- Connect the battery charger to a power socket (230 V / 50 Hz) and let the battery charge for the necessary time.
FIG. 10
3.8.4 TROUBLESHOOTING
ATTENTION
TROUBLESHOOTING
In the event that the assistance system does
not activate even if the battery is charged,
contact the authorized dealer.
PROBLEM
CAUSE/SOLUTION
The system doesn’t turn on
Check if charger is on
PROBLEM
CAUSE/SOLUTION
Assistance doesn’t work
Check if the charging level is suffi-
cient.
ATTENTION
CHARGER
Always connect the plug to the bat-
tery first and then the battery charg-
er to the power outlet.