manualshive.com logo in svg

MBM E-METRO, User Manual, Page: 19 / 33

Share
Download
MBM E-METRO User Manual Download Page 19

E-METRÒ

 USER MANUAL

p.19

6. COMMISSIONING

6.1 BATTERY CHARGE

Before using the bicycle for the first time, the battery must be charged for at least 24 hours, using the special battery 
charger, supplied.
The pedal assisted bicycle, model E - METRÒ, is equipped with an electric motor powered by a 37 V lithium-ion battery. The 
battery pack is housed in the rear part of the bicycle, under the luggage rack.
The average charging time varies from 4 to 6 hours.
The recharging operation can be carried out in a well-ventilated box with the battery installed on the bicycle. To charge 
the battery proceed as in paragraph 3.8.3.

ATTENTION

LEVEL OF BATTERY CHARGE

The battery should not be fully discharged to 

preserve its life and not run the risk of damaging 

it. In any case, it must be recharged at least every 

3 months even if the bicycle is not used.

PRECAUTIONS DURING CHARGING PROCESS
• Always connect the plug to the battery and then the power plug to the mains.
• When charging is complete, always disconnect the plug from the mains first and then the plug from the battery.
• Always recharge the battery fully.
• Always use the original power supply supplied.
• Do not leave the battery charging longer than necessary.
• Always recharge in a ventilated area.
• Do not recharge the battery in too hot environments.
• Do not recharge the battery near flammable liquids.
• Do not cover the battery in any way while charging.
• If the battery emits a bad smell, immediately disconnect the plug from the power supply and ventilate the
room, do not touch the battery.

PERICOLO

ATTENTION

CHARGER

Always connect the plug to the battery first and 

then the battery charger to the power outlet.

Summary of Contents for E-METRO


































Reviews:

No comments