manualshive.com logo in svg

MBM E-METRO, User Manual, Page: 11 / 33

Share
Download
MBM E-METRO User Manual Download Page 11

E-METRÒ

 USER MANUAL

p.11

3.5.2  Assistance levels

To know the exact intensity of assistance,
based on the selected value, see below.

3.6 ASSISANCE ATTIVATION

The assistance system is controlled by the controller on the 
handlebar, near the left grip. In particular, assistance is acti-
vated or deactivated using the “M” button (Ref. L - Figure 6).
Once the system is activated, the management display itself 
(Ref. I - Figure 6) is switched on, through which it is possible 
to see the activity status of the vehicle. The power of the en-
gine depends on the force impressed on the pedals, accord-
ing to a multiplication factor based on the level of assistance 
selected. Assistance decreases linearly until reaching 25 km 
/ h. once this speed is exceeded, assistance is automatically 
deactivated.

LEVEL 1 -  

0 ASSISTANCE

LEVEL 2 - 

ASSISTANCE 25%

Recommended route: plain / hilly - medium-long distances

LEVEL 3 - 

ASSISTANCE 50%

Recommended route: hilly / medium ascent - medium distances

LEVEL 4 - 

ASSISTANCE 75%

Recommended route: uphill - medium-short distances

LEVEL 5 - 

ASSISTANCE 100%

Recommended route: challenging climb - short distance

3.5 ASSISTANCE SYSTEM MANAGEMENT

3.5.1 Commands

To manage the assistance system there is a controller on the left side of the handlebar. This device allows you to vary the 
level of assistance of the system, to view information regarding the route and the status of the battery.

L -

 

Press and hold to turn on / off.

Press instantly to change the information shown on the dis-
play.

M -

 

The button allows you to increase the level of assistance.

N - 

The button allows you to decrease the level of assis-

tance.

I -

 

The display allows you to view the following information:

1- Total distance

2- Time

3- Speed

4- Walk mode

5- PAS level

6- Battery status

FIG. 6

Summary of Contents for E-METRO


































Reviews:

No comments