background image

ENGLISH

ENGLISH

ENGLISH

ENGLISH

Electronic Grinder-Dosers

Electronic Grinder-Dosers

Electronic Grinder-Dosers

Electronic Grinder-Dosers

In order to adjust the size of the portion dispensed, use the push button controls located on the 

lid of the funnel. After having set the optimal degree of fineness, check the weight of the dose 

with a digital precision scale. 

In order to adjust the dose press the push button “MENU” for 3 seconds; the display will blink. 

Select the dose you wish to adjust : either the single dose (indicating one cup) or the double 

dose (indicating two cups). The display will show the grinding time (in seconds) of the selected 

dose. By pressing the push buttons “+” and “-“ the grinding time can be increased or decreased 

and consequently the selected dose can be increased or decreased. 

Approximately, a change of 0.10 seconds is equivalent to a change of dose of 0.3 grams (0.01 

ounces). 

To set the desired amount of grinding time press the push button “MENU” for 3 seconds. A 

blinking of the display will confirm the data have been saved and the exit from the adjusting 

program. 

Use a digital precision scale to check again the weight of the dose and, if necessary, repeat 

above mentioned operation.

WHEN   YOU   ARE   INSIDE   THE   ADJUSTING   PROGRAM   IT   IS   NOT   POSSIBLE   TO 

OPERATE THE APPLIANCE. 

IF THE APPLIANCE GETS SWITCHED OFF (SWITCH IN THE POSITION O) BEFORE 

EXITING FROM THE ADJUSTING PROGRAM THE CHANGES ARE NOT SAVED.

In order to collect the portions of ground coffee, insert the filter holder all the way onto the fork-

shaped support under the ground coffee outlet.

PRESSING   

PRESSING   

PRESSING   

PRESSING   

(Grinder-Dosers)

(Grinder-Dosers)

(Grinder-Dosers)

(Grinder-Dosers)

STATIC PRESSING DEVICE: place the filter holder against the underside of the pressing 

device and push upwards. 

SPRING PRESSING DEVICE: place the compacting disk against the upper face of the filter 

holder inserted in the fork-shaped support and press down on the spring pressing device knob.

7777

PUSH BUTTON PANEL  

GRINDING TIME

MENU BUTTON

ADJUSTMENT BUTTON

PUSH BUTTON FOR

DISPLAY

MANUAL GRINDING

SINGLE DOSE BUTTON

DOUBLE DOSE BUTTON

STATIC

SPRING

PRESSING DEVICE

PRESSING DEVICE

Summary of Contents for Electronic GRINDER-DOSER Stard













Reviews: