background image

Doser   

Doser   

Doser   

Doser   

(Grinder-Dosers)

(Grinder-Dosers)

(Grinder-Dosers)

(Grinder-Dosers)

Having discharged the ground coffee, clean the doser’s star unit with a clean brush, expelling 

the material removed by pulling the doser lever. 

Use a dry cloth to thoroughly clean the outlet of the ground coffee on the bottom of the doser. 

When a more thorough cleaning is required, the operation must be performed only by skilled 

technical personnel, after disconnecting the appliance from the power supply

after disconnecting the appliance from the power supply

after disconnecting the appliance from the power supply

after disconnecting the appliance from the power supply, according to the 

following instructions:

1. Remove the coffee outlet guard unscrewing the relevant screws;

2. Unscrew the hexagonal-head screw that fix the coffee dose adjustment knob;

3. Unscrew (anticlockwise) the coffee dose adjustment knob holding the doser’s stars unit 

(female dosing star and the upper dosing star) pushed down;

4. Remove the doser’s stars unit;

5. Remove the central spring;

6. Clean thoroughly the bottom of the doser, especially the sharp edges on sight and the outlet 

of the ground coffee.

In order to reassemble the doser, follow the previous instructions in inverted order; pay 

attention that the feather of the coffee-outlet covering section plate is correctly set in the proper 

slide on the side of the basin.
Spout   

Spout   

Spout   

Spout   

(Coffee Grinders with bag holder)

(Coffee Grinders with bag holder)

(Coffee Grinders with bag holder)

(Coffee Grinders with bag holder)

Wipe clean the spout from which ground coffee is released using a dry cloth.
Funnel   

Funnel   

Funnel   

Funnel   

(Electronic Grinder-Dosers)

(Electronic Grinder-Dosers)

(Electronic Grinder-Dosers)

(Electronic Grinder-Dosers)

After having removed the lid, clean the funnel and its lid with a dry and disinfected brush.

12

12

12

12

Mazzer Luigi srl

Mazzer Luigi srl

Mazzer Luigi srl

Mazzer Luigi srl
All right reserved. It is prohibited to reproduce, adapt or translate this document without prior 
written authorization.

First Edition:

2004

Last Revised:

MJ05  09/2012

Summary of Contents for Electronic GRINDER-DOSER Stard













Reviews: