MAZZELLA NTM BG7, Operation And Maintenance Manual

Page: 27 / 50

CHAPTER 10
RUN OUT TABLES
24
RUN OUT TABLES
(Figure 15)
The Run-Out Table attaches to the Exit End of the Shear assembly, and is used to support
the gutter as it exits the machine. It is available in 10 ft. long sections that fasten together,
and have adjustable legs so they can be set to the correct height.
1. Set the first Run-Out Table on its side and in front of the machine with the leg
assembly away from the shear.
2. Open the leg assembly and attach the Run-Out Table Adapter angle to the table.
3. Lift the attachment end of the table and insert the Run-Out Table adapter angle
into the gap between the shear and the frame.
4. Loosen the 2 knob-handles on the leg assembly and allow the legs to fall free.
Sight the height of the table on the left and right side adjusting it level to the
machine using the knob-handles to lock the legs in place.
5. Repeat the above procedures for each succeeding table and attach it to the bracket
on the end of the previous table.

Figure 15: Run Out Table