MAZZELLA NTM BG7, Operation And Maintenance Manual

Page: 36 / 50

APPENDIX A
COMPUTER BATCH AND LENGTH CONTROLLER
A - 3
Features
The MP465 controller’s features include:
•
Accurate length control
•
Simple programming
•
Easy calibration
Manual Operations
Jogging Material
•
To jog material forward using the MP465, turn the jog switch on the controller
to the right (clockwise).
•
To jog material in reverse using the MP465, turn the jog switch on the controller
to the left (counter-clockwise).
Manual Shear
To fire the shear manually, press the shear button
.

Note: The controller must be in Manual mode.
Production Procedures
Screen Navigation
Keypad
The keypad uses hot keys to enable quick entry into certain screens.
Program Press [Program] to program a Job Number, Quantity, and Length;
press it again to specify the next job to run.
Status Press [Status] to exit the current screen and return to the Status
screen.
Calibration Press [Calibration] to calibrate the length management system;
by pressing it again you can display other screens like the
Production Totalizer and Stopping Reaction.
Enter Press [Enter] to enter or store the current value. [Enter] can also
be used to move to the next value.
Clear Press [Clear] ( clear entry ) to clear or set an entry back to its