background image

(Except Mexico)

Vehicles with a front passenger air bag have the following warning label. The warning label
reminds you not to put a rear-facing child-restraint system on the front passenger seat at any
time.

(Mexico)

NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front
of it, DEATH or SERIOUS INJURY to the CHILD can occur.
Vehicles with a front passenger air bag have the following warning label. The warning label
reminds you not to put a rear-facing child-restraint system on the front passenger seat at any
time.
 

Do not install a front-facing child-restraint system on the front passenger seat unless it is
unavoidable:

In a collision, the force of a deploying air bag could cause serious injury or death to the child. If
installing a front-facing child-restraint system on the front passenger seat is unavoidable,
move the front passenger seat as far back as possible and adjust the seat bottom (height
adjustable seat bottom) to the highest position at which the seat belt fastening the
child-restraint system is securely tightened.

Essential Safety Equipment

Child Restraint

2-39

CX-9_8HB2-EA-18G_Edition4_old

2019-3-15 13:53:31

Summary of Contents for CX-9 2019

























































































































































































































































































































































































































































































































































































































































































































Reviews: