When Driving
41
For details, refer to Section 4, “i-ACTIVSENSE”.
The SBS-RC is a system designed to assist the driver in avoiding collisions and to
reduce damage in the event of a collision by applying the brakes if there is the
possibility of collision with a vehicle approaching from the rear while you are
reversing out of parking space.
The system is only designed to assist you in backing out of the lot when
putting the vehicle in reverse. Due to certain limitations with the operation of
this system, the SBS-RC system may not operate brake or it might be delayed
even though a vehicle is behind your vehicle. Always make it your
responsibility as a driver to check the rear.
• The SBS-RC system is only designed to reduce damage in the event of a
collision. Over reliance on the system leading to the accelerator pedal or
brake pedal being mistakenly operated could result in an accident.
Always check the surrounding area visually before actually putting the
vehicle in reverse:
Do not rely completely on the SBS-RC system:
To assure the correct operation of the SBS-RC, heed the following cautions.
WARNING
• The SBS-RC system operates in response to a vehicle. The system does not
operate in response to obstructions such as a wall, pedestrians, 2-wheeled
vehicles, or animals.
• Do not apply a sticker to a rear radar and rear camera. Otherwise, the
rear radar and rear camera may not be able to detect vehicles or
obstructions which could result in an accident.
• Do not disassemble a rear radar and rear camera.
Smart Brake Support [Rear Crossing] (SBS-RC)
Summary of Contents for CX-30
Page 47: ...46 MEMO ...
