background image

When Driving

32

For details, refer to Section 4, “i-ACTIVSENSE”.

Lane-keep Assist System (LAS)

The LAS provides steering assistance to help the driver stay within the vehicle 
lane if the vehicle might be deviating.
The forward sensing camera (FSC) detects the white lines (yellow lines) of the 
vehicle lane in which the vehicle is travelling and if the system determines that 
the vehicle may deviate from its lane, it operates the electric power steering to 
assist the driver’s steering operation.

Do not rely completely on the LAS.

For the details, refer to the owner's manual.

WARNING

• The LAS is not an automated driving system. In addition, the system is not 

designed to compensate for a driver’s lack of caution, and over-reliance 
on the system could lead to an accident.

• The functions of the LAS have limitations. Always stay on course using 

the steering wheel and drive with care.

The system also alerts the driver by displaying an alert on the multi-information 
display and the active driving display.
Use the system when you drive the vehicle on roads with white (yellow) lines 
such as expressways and highways.

Forward sensing camera (FSC)

Summary of Contents for CX-30
















































Reviews: