background image

When Driving

24

Traffic Sign Recognition System (TSR)

The TSR helps prevent the driver from overlooking traffic signs, and provides 
support for safer driving by displaying traffic signs on the active driving 
display/instrument cluster which are recognised by the Forward Sensing Camera 
(FSC) or recorded in the navigation system while the vehicle is driven.

The TSR displays the speed limit (including auxiliary signs) , do not enter, traffic 
stop, and passing prohibited signs.

The following traffic signs are displayed on the active driving display/instrument 
cluster.

Speed limit signs
Auxiliary sign (example)

Speed limit signs (including 
auxiliary signs)

Do not enter signs

Stop signs

Passing prohibited sign

Inclement weather speed 
limit sign

If the vehicle speed exceeds the speed limit sign indicated in the active driving 
display/instrument cluster while the vehicle is driven, the system notifies the driver 
using the indication in the active driving display/instrument cluster and a warning 
sound.

Always check the traffic signs visually while driving.

WARNING

The TSR helps prevent the driver from overlooking traffic signs and provides 
support for safer driving. Depending on the weather conditions or problems 
with traffic signs, a traffic sign may not be recognised or a traffic sign 
different from the actual traffic sign may be displayed. Always make it your 
responsibility as a driver to check the actual traffic signs. Otherwise, it could 
result in an accident.

Traffic Sign Display Indication

For details, refer to Section 4, “i-ACTIVSENSE”.

Summary of Contents for CX-30
















































Reviews: