Mazda 8T12-EA-03K User Manual Download Page 155

Page: 155 / 326

Black plate (155,1)

Daytime Running Lights
(Canada)

In Canada, vehicles must be driven with
the headlights on during daytime
operation.

For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.

NOTE

The Daytime Running Lights turn off
when the parking brake is applied.

Turn and Lane-Change
Signals

Turn Signal

Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.

If the indicator light continues to flash
after a turn, manually return the lever to
its original position.

Right turn

Left turn

OFF

Right lane
change

Left lane
change

Green indicators on the dashboard show
which signal is working.

Lane-change signals

Move the lever slightly toward the
direction of the change

—

until the

indicator flashes

—

and hold it there. It

will return to the off position when
released.

NOTE

If an indicator light stays on without
flashing or if it flashes abnormally, the
turn signal bulb may be burned out.

Driving Your Mazda

Switches and Controls

5-39

Mazda6_8T12-EA-03K_Edition1 Page155
Friday, December 5 2003 8:56 AM

Form No.8T12-EA-03K

Summary of Contents for 8T12-EA-03K







































































































































































































































































































































Search results

Summary of Contents for 8T12-EA-03K

Reviews:

Related manuals for 8T12-EA-03K

Brands by name

Popular brands

Mazda 8T12-EA-03K, User Manual

Search results

Summary of Contents for 8T12-EA-03K

Reviews:

Related manuals for 8T12-EA-03K

Brands by name

Popular brands