Mazda 8T12-EA-03K User Manual Download Page 96

Page: 96 / 326

Black plate (96,1)

Slide Operation

To open to any position, press the rear of
the slide switch.

To close, press the front of the slide
switch.

Open

Sunshade

The sunshade can be opened and closed
by hand.

The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.

Sunshade

CAUTION

The sunshade doesn't tilt. To avoid
damaging the sunshade, don't push up
on it.

3-28

Knowing Your Mazda

Doors and Locks

Mazda6_8T12-EA-03K_Edition1 Page96
Friday, December 5 2003 8:55 AM

Form No.8T12-EA-03K

Summary of Contents for 8T12-EA-03K







































































































































































































































































































































Search results

Summary of Contents for 8T12-EA-03K

Reviews:

Related manuals for 8T12-EA-03K

Brands by name

Popular brands

Mazda 8T12-EA-03K, User Manual

Search results

Summary of Contents for 8T12-EA-03K

Reviews:

Related manuals for 8T12-EA-03K

Brands by name

Popular brands