Mazda 8T12-EA-03K User Manual Download Page 128 | Manualshive

Page: 128 / 326

background image

Black plate (128,1)

q

Manual Shift Mode

This mode gives you the feel of driving a
manual transaxle vehicle by operating the
shift lever and allows you to control
engine rpm and torque to the front wheels
much like a manual transaxle when more
control is desired.

To change to manual shift mode, shift the
lever from D to M.

To return to automatic shift mode, shift
the lever from M to D.

NOTE

l

If you change to manual shift mode
when the vehicle is stopped, the gear
will shift to M1.

l

If you shift up once when the vehicle
is stopped and the gear is at M1, the
gear will shift to M2. M2 is helpful
for starting on slippery surfaces.

Indicators

Shift position indicator

In manual shift mode, the

“

M

”

of the shift

position indicator in the instrument panel
illuminates.

Gear position indicator

The numeral for the selected gear
illuminates.

Shift position
indicator

Gear position
indicator

NOTE

If the gears cannot be shifted down
when driving at higher speeds, the gear
position indicator will flash twice to
signal that the gears cannot be shifted
down.

Shifting

Manually Shifting up

(M1

→

M2

→

M3

→

M4

→

M5

*

)

To shift up to a higher gear, tap the shift
lever back ( ) once.

* 3.0-liter engine model

5-12

Driving Your Mazda

Starting and Driving

Mazda6_8T12-EA-03K_Edition1 Page128
Friday, December 5 2003 8:55 AM

Form No.8T12-EA-03K

«
...
126
127
128
129
130
...
»

Summary of Contents for 8T12-EA-03K







































































































































































































































































































































Reviews:

No comments

Related manuals for 8T12-EA-03K

Brand: Xblitz Pages: 16

Brand: Chevrolet Pages: 494

Brand: Rola Pages: 3

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Brand: JKS Pages: 3

BASIC TLL171231

Brand: Tellur Pages: 5

Brand: E&G Classics Pages: 3

Brand: Quadratec Pages: 6

Brand: Subaru Pages: 540

Brand: Lantronix Pages: 51

Brand: Discount Car Stereo Pages: 8

Brand: Hama Pages: 13

Brand: Ford Pages: 51

Brand: Kargo Master Pages: 17

Brand: Audiovox Pages: 2

ProPlus 620066V01

Brand: PAT Pages: 13

Brand: SoundMax Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands