Mazda 8T12-EA-03K User Manual Download Page 135 | Manualshive

Page: 135 / 326

background image

Black plate (135,1)

q

To Decrease Cruising Speed

Press the SET/COAST button and hold it.
The vehicle will gradually slow.
Release the button at the speed you want.

Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the SET/COAST
button. Multiple taps will decrease your
vehicle speed 1.6 km/h (1 mph) for each
tap.

q

To Resume Cruising Speed at
More Than 40 km/h (25 mph)

If some other method besides the ON/
OFF switch was used to cancel cruising
speed and the system is still activated, the
most recent set speed will automatically
resume when the RES/ACCEL button is
pressed.
If vehicle speed is below 40 km/h (25
mph), increase the vehicle speed up to 40
km/h (25 mph) and press the RES/
ACCEL button.

q

To Cancel

To turn off the system, use

one

of these

methods:

l

Press the ON/OFF switch.

l

Slightly depress the brake pedal.

l

Depress the clutch pedal. (Manual
transaxle only)

Driving Your Mazda

Starting and Driving

5-19

Mazda6_8T12-EA-03K_Edition1 Page135
Friday, December 5 2003 8:55 AM

Form No.8T12-EA-03K

«
...
133
134
135
136
137
...
»

Summary of Contents for 8T12-EA-03K







































































































































































































































































































































Reviews:

No comments

Related manuals for 8T12-EA-03K

Brand: Metra Electronics Pages: 14

Brand: Jeep Pages: 6

Brand: Ultra Start Pages: 8

Brand: Vauxhall Pages: 177

Brand: Kuda-Phonebase Pages: 3

Brand: U & Me Brothers Pages: 6

Brand: Subaru Pages: 21

Brand: Ford Pages: 368

MCL-7000 Series

Brand: Dakota Digital Pages: 2

Brand: Volvo Pages: 284

Brand: BMW Pages: 38

Brand: Cadillac Pages: 20

Brand: Prorack Pages: 10

Brand: Lincoln Pages: 586

Brand: Master Tailgaters Pages: 10

Brand: Blaupunkt Pages: 6

Outlander Plug-in hybrid

Brand: Mitsubishi Pages: 28

Brand: PMT Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands