Mazda 6 2016, Manual

Page: 491 / 610

Black plate (491,1)
q
Plastic Part Maintenance
l
When cleaning the plastic lenses of the
lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly
acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical
agents can discolor or damage the
surfaces resulting in a significant loss
in functionality. If plastic parts become
inadvertently exposed to any of these
chemical agents, flush with water
immediately.
l
If plastic parts such as the bumpers
become inadvertently exposed to
chemical agents or fluids such as
gasoline, oil, engine coolant, or battery
fluid, it could cause discoloration,
staining, or paint peeling. Wipe off any
such chemical agents or fluids using a
soft cloth immediately.
l
High water temperature and high water
pressure car washers are available
depending on the type of high pressure
car washer device. If the car washer
nozzle is put too close to the vehicle or
aimed at one area for an extended
period of time, it could deform plastic
parts or damage the paint.
l
Do not use wax containing compounds
(polish). Otherwise, it could result in
paint damage.
l
In addition, do not use an electrical or
air tool to apply wax. Otherwise, the
frictional heat generated could result in
deformation of plastic parts or paint
damage.
Interior Care
WARNING
Do not spray water into the vehicle
cabin.
Spraying water into the vehicle cabin
is dangerous as electrical devices
such as the audio and switches could
get wet resulting in a malfunction or
vehicle fire.
NOTE
l
Do not wipe the interior using alcohol,
chlorine bleach, or organic solvents such as
thinner, benzene , and gasoline. Otherwise,
it may cause discoloration or stains.
l
Rubbing hard with a stiff brush or cloth
may cause damage.
If the vehicle interior becomes soiled by
any of the following, wipe it off
immediately using a soft cloth.
Leaving it uncleaned could cause
discoloration, stains, cracks, or peeling of
the coating, and it will make it hard to
wipe off later.
l
Beverage or fragrance
l
Grease or oil
l
Soiling
q
Seat Belt Maintenance
1. Clean the soiled area by lightly
dabbing it with a soft cloth soaked in a
mild detergent (approx. 5%) diluted
with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
3. Before retracting seat belts which have
been pulled out for cleaning, dry them
off thoroughly and make sure there is
no remaining moisture on them.
Maintenance and Care
Appearance Care
6-69
Mazda6_8EA2-EA-14K_Edition5 Page491
Friday, November 27 2015 5:1 PM
Form No.8EA2-EA-14K