Mazda 6 2016, Manual

Page: 249 / 610

Black plate (249,1)
l
In the following cases, the
“
MRCC
Cancelled
”
indication is displayed and
the beep sounds one time.
l
The vehicle speed decreases to less
than 25 km (16 mph).
l
The DSC has operated.
l
The TCS has operated for a certain
period of time.
l
The Smart City Brake Support
(SCBS) has operated.
l
The Smart Brake Support (SBS) has
operated.
l
When traveling on a down slope for
a long period of time.
l
There is a problem with the system.
NOTE
l
The Mazda Radar Cruise Control (MRCC)
system may be canceled during rain, fog,
snow or other inclement weather
conditions, or the front surface of the
radiator grille is dirty.
l
If you have temporarily canceled the Mazda
Radar Cruise Control (MRCC), you can
return to your previously set speed by
pressing the RES switch and after all of the
operation conditions have been met.
l
If the OFF switch is pressed to cancel the
Mazda Radar Cruise Control (MRCC), the
system does not return to the previously set
speed even if the RES switch is pressed.
q
Cruise Control Function
While this function is operating, the
headway control operation is canceled and
only the cruise control function operates.
The vehicle speed can be set more than
about 25 km/h (16 mph).
Use the cruise control function on
expressways and other highways which
do not require a lot of repeated
acceleration and deceleration.
WARNING
Do not use the cruise control function
in the following locations:
Otherwise, it could lead to an
accident.
Ø
Roads with sharp curves and
where vehicle traffic is heavy and
there is insufficient space between
vehicles. (Driving under these
conditions using the cruise control
function is not possible)
Ø
Steep down slopes (Set speed may
be exceeded because sufficient
engine braking cannot be applied)
Ø
Slippery roads such as ice or
snow-bound roads (Tires could
spin causing you to lose vehicle
control)
Always drive carefully:
The warnings and brake control will
not operate after the headway
control function is canceled and the
system is switched to only the cruise
control function. Depress the brake
pedal to decelerate according to the
surrounding conditions while keeping
a safer distance from the vehicle
ahead and always driving carefully.
Switching to cruise control function
When the ON switch is pressed
continuously for about 2 seconds while
the Mazda Radar Cruise Control (MRCC)
system is turned on, the system is
switched to the cruise control function.
The Mazda Radar Cruise Control
(MRCC) indicator light (green) in the
instrument cluster turns off and a message
is displayed in the multi-information
display at the same time.
When Driving
i-ACTIVSENSE
4-125
Mazda6_8EA2-EA-14K_Edition5 Page249
Friday, November 27 2015 4:57 PM
Form No.8EA2-EA-14K