Mazda 6 2016, Manual

Page: 22 / 610

Black plate (22,1)
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
NOTE
l
If there is no seat position movement, a
beep is not heard.
l
When the ignition is switched ON, the seat
position memory function does not operate
unless the selector lever is in the P position
(Automatic transaxle) or the parking brake
is applied (Manual transaxle).
l
When the ignition is switched OFF, the seat
position memory function is operable while
the selector lever is in a position other than
P position (Automatic transaxle) or the
parking brake is not applied (Manual
transaxle), however, if the ignition is
switched ON while the seat position
memory function is operating, the operation
is stopped.
l
The seat position adjustment is canceled in
the following cases:
l
Any of the seat adjustment switches is
operated.
l
The SET button is pressed.
l
Programming button 1 or 2 is pressed.
l
The key switch or switch is
operated.
l
The vehicle starts moving.
Erasing programmed seat positions
(Erasing the seat positions programmed
to the key)
1. Switch the ignition OFF.
2. Press the SET button on the seat until a
beep sound is heard one time.
3. After the beep sounds, press the key
switch within 5 seconds until a beep
sound is heard one time.
NOTE
If a beep sound is heard three times, the
operation is canceled.
2-10
Essential Safety Equipment
Seats
Mazda6_8EA2-EA-14K_Edition5 Page22
Friday, November 27 2015 4:55 PM
Form No.8EA2-EA-14K