Mazda 2012 Mazda6, Owner'S Manual

Page: 422 / 527

Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year
―
at the beginning of the
winter season
―
and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the FULL or F and
LOW or L marks on the coolant reservoir
when the engine is cool.
2.5-liter engine
3.7-liter engine
If it is at or near LOW or L, add enough
coolant to the coolant reservoir to provide
freezing and corrosion protection and to
bring the level to FULL or F.
Securely tighten the coolant reservoir tank
cap after adding coolant.
CAUTION
Ø
Radiator coolant will damage
paint.
Rinse it off quickly if spilled.
Ø
Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.
Ø
Do not add only water. Always
add a proper coolant mixture.
Ø
The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.
Ø
DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.
Ø
DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.
Ø
Do not use a solution that
contains more than 60%
antifreeze.
This would reduce effectiveness.
If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.
Maintenance and Care
Owner Maintenance
8-23
Mazda6_8CD2-EC-11D_Edition1 Page421
Friday, April 15 2011 1:7 PM
Form No.8CD2-EC-11D