Mazda 2012 Mazda6 Owner'S Manual Download Page 214

Page: 214 / 527

Headlight Leveling

The number of passengers and weight of
cargo in the luggage compartment change
the angle of the headlights.

The headlight leveling switch is used to
adjust the angle of the headlights
manually.

Select the proper headlight angle from the following
chart.

Front seat

Rear

seat

Load

Switch

Position

Driver

Passenger

―

×: Yes

―

: No

Daytime Running Lights (Canada)

In Canada, vehicles must be driven with
the headlights on during daytime
operation.

For that reason, the daytime running lights
automatically turn on when the ignition is
switched ON.

NOTE

The Daytime Running Lights turn off when the
parking brake is applied.

Driving Your Mazda

Switches and Controls

5-65

Some models.

Mazda6_8CD2-EC-11D_Edition1 Page213
Friday, April 15 2011 1:5 PM

Form No.8CD2-EC-11D

Summary of Contents for 2012 Mazda6
















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Mazda6

Reviews:

Related manuals for 2012 Mazda6

Brands by name

Popular brands

Mazda 2012 Mazda6, Owner'S Manual

Search results

Summary of Contents for 2012 Mazda6

Reviews:

Related manuals for 2012 Mazda6

Brands by name

Popular brands