Mazda 2012 Mazda6 Owner'S Manual Download Page 111

Page: 111 / 527

4. Slide the inside trunk release lever in

the direction of the arrow.

After performing this emergency measure,
have the vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.

Closing the trunk lid

Use both hands to push the trunk lid down
until the lock snaps shut. Do not slam it.
Pull up on the trunk lid to make sure it is
secure.

Trunk Light

The trunk light is on when the lid is open
and off when it's closed.

NOTE

To prevent the battery from being
discharged, do not leave the trunk open for
a long period when the engine is not
running.

(Battery saver)

If the lid is left open, the trunk light turns
off after about 30 minutes to prevent battery
depletion.

3-38

Knowing Your Mazda

Doors and Locks

Mazda6_8CD2-EC-11D_Edition1 Page110
Friday, April 15 2011 1:4 PM

Form No.8CD2-EC-11D

Summary of Contents for 2012 Mazda6
















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Mazda6

Reviews:

Related manuals for 2012 Mazda6

Brands by name

Popular brands

Mazda 2012 Mazda6, Owner'S Manual

Search results

Summary of Contents for 2012 Mazda6

Reviews:

Related manuals for 2012 Mazda6

Brands by name

Popular brands