Mazda 2012 Mazda6 Owner'S Manual Download Page 383

Page: 383 / 527

Jack

To remove the jack

1. Open the trunk mat.

2. Remove the jack container lid.

3. Turn the wing bolt and jack screw

counterclockwise.

Wing bolt

Jack screw

To secure the jack

1. Insert the wing bolt into the jack with

the jack screw pointing front and turn
the wing bolt clockwise to temporarily
tighten it.

2. Turn the jack screw in the direction

shown in the figure.

Wing bolt

Jack screw

3. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.

Maintenance

Always keep the jack clean.

Make sure the moving parts are kept
free from dirt or rust.

Make sure the screw thread is
adequately lubricated.

7-4

In Case of an Emergency

Flat Tire

Mazda6_8CD2-EC-11D_Edition1 Page382
Friday, April 15 2011 1:7 PM

Form No.8CD2-EC-11D

Summary of Contents for 2012 Mazda6
















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Mazda6

Reviews:

Related manuals for 2012 Mazda6

Brands by name

Popular brands

Mazda 2012 Mazda6, Owner'S Manual

Search results

Summary of Contents for 2012 Mazda6

Reviews:

Related manuals for 2012 Mazda6

Brands by name

Popular brands