Mazda 2012 5, Owner'S Manual, Page: 362 / 441

Black plate (361,1)
2. Turn the screw counterclockwise and
remove it, then partially peel back the
mudguard.
3. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
4. Turn the bulb assembly
counterclockwise and remove it.
Carefully remove the bulb from its
socket in the reflector by gently pulling
it straight backward out of the socket.
5. Install the new bulb in the reverse order
of removal.
Front turn signal lights/Front side-
marker lights/Parking lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Remove the bulb by pressing it in
slightly and turning it
counterclockwise.
Maintenance and Care
Owner Maintenance
8-43
Mazda5_8BS1-EC-10J_Edition3 Page361
Monday, April 11 2011 3:42 PM
Form No.8BS1-EC-10J