Mazda 2012 5 Owner'S Manual Download Page 352

Page: 352 / 441

Black plate (351,1)

3 Pull out the battery cover being

careful not to allow it to contact
the cowl grille.

Battery cover

Cowl grille

Installing battery cover

1 Being careful not to contact the

cowl grille, insert the tabs on the
one end of the battery cover into
the holes of the battery tray and
engage the tabs.

Cowl grille

Tabs

Holes

2 Attach the clips on both sides of

the battery cover.

Clip

Battery Maintenance

To get the best service from a battery:

Keep it securely mounted.

Keep the top clean and dry.

Keep terminals and connections clean,
tight, and coated with petroleum jelly
or terminal grease.

Rinse off spilled electrolyte
immediately with a solution of water
and baking soda.

If the vehicle will not be used for an
extended time, disconnect the battery
cables.

Maintenance and Care

Owner Maintenance

8-33

Mazda5_8BS1-EC-10J_Edition3 Page351
Monday, April 11 2011 3:42 PM

Form No.8BS1-EC-10J

Summary of Contents for 2012 5


























































































































































































































































































































































































































































Search results

Summary of Contents for 2012 5

Reviews:

Related manuals for 2012 5

Brands by name

Popular brands

Mazda 2012 5, Owner'S Manual

Search results

Summary of Contents for 2012 5

Reviews:

Related manuals for 2012 5

Brands by name

Popular brands