Mazda 2012 5 Owner'S Manual Download Page 297

Page: 297 / 441

Black plate (296,1)

Jack

To remove the jack

1. Remove the cover.

2. Turn the wing bolt and jack screw

counterclockwise.

Wing bolt

Jack screw

To secure the jack

1. Insert the wing bolt into the jack with

the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.

2. Turn the jack screw in the direction

shown in the figure.

Wing bolt

Jack screw

3. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.

Maintenance

Always keep the jack clean.

Make sure the moving parts are kept
free from dirt or rust.

Make sure the screw thread is
adequately lubricated.

7-4

In Case of an Emergency

Flat Tire

Mazda5_8BS1-EC-10J_Edition3 Page296
Monday, April 11 2011 3:41 PM

Form No.8BS1-EC-10J

Summary of Contents for 2012 5


























































































































































































































































































































































































































































Search results

Summary of Contents for 2012 5

Reviews:

Related manuals for 2012 5

Brands by name

Popular brands

Mazda 2012 5, Owner'S Manual

Search results

Summary of Contents for 2012 5

Reviews:

Related manuals for 2012 5

Brands by name

Popular brands