Mazda 2012 5, Owner'S Manual

Page: 338 / 441

Black plate (337,1)
The quality designation SM, or ILSAC
must be on the label.
0W-20
120 100 80 60 40 20 0
–20
50 40
30
20 10
0
–10
–20
–30
q
Inspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
Type A
Full
OK
Low
OK
Full
Low
Type B
5. Pull it out again and examine the level.
The level is normal if it is between
Low and Full.
If it is near or below Low, add enough
oil to bring the level to Full.
CAUTION
Do not add engine oil over Full. This
may cause engine damage.
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
Maintenance and Care
Owner Maintenance
8-19
Mazda5_8BS1-EC-10J_Edition3 Page337
Monday, April 11 2011 3:42 PM
Form No.8BS1-EC-10J