Mazda 2012 5, Owner'S Manual

Page: 247 / 441

Black plate (246,1)
NOTE
l
Some Bluetooth audio devices need a
certain amount of time before the
“ ”
symbol is displayed.
l
If the programming failed,
“
Err
”
flashes
for three seconds then it returns to
“
PAIR DEVICE
”
.
l
Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving,
“
PAIR DISABLE
”
is displayed and
it returns to
“
PAIR DEVICE
”
.
l
If seven Bluetooth audio devices have
already been programmed to the vehicle,
programming cannot be performed and
“
MEMORY FULL
”
is displayed. Delete
one programmed device to program
another one.
Programming a Bluetooth audio device
which does not have a four-digit PIN
code
1. Using the audio control dial, select the
pairing program mode
“
PAIR DEVICE
”
in the
“
BT SETUP
”
mode. (Refer to
“
Bluetooth audio set up
”
for details.)
2. Press the audio control dial to
determine the mode.
After
“
ENTER PIN
”
is displayed on
the information display for three
seconds,
“
PIN 0000
”
is displayed and
the PIN code can be input.
3. Press the audio control dial while
“
PIN 0000
”
is displayed.
“
PAIRING
”
flashes on the display.
4. Operate the Bluetooth audio device and
set it to the program mode while
“
PAIRING
”
is flashing.
5. As the Bluetooth audio device requires
a PIN code, input
“
0000
”
.
6. When the programming is completed,
“ ”
and
“
PAIR SUCCESS
”
are
displayed after about 10-30 seconds,
after which
“
PAIR SUCCESS
”
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
NOTE
l
If pairing cannot be completed, try
“
1234
”
instead. Refer to the owner's manual of
your mobile device for the right PIN code.
l
Some Bluetooth audio devices need a
certain amount of time before the
“ ”
symbol is displayed.
l
If the programming failed,
“
Err
”
flashes
for three seconds then it returns to
“
PAIR DEVICE
”
.
l
Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving,
“
PAIR DISABLE
”
is displayed and
it returns to
“
PAIR DEVICE
”
.
l
If seven Bluetooth audio devices have
already been programmed to the vehicle,
programming cannot be performed and
“
MEMORY FULL
”
is displayed. Delete
one programmed device to program
another one.
6-60
Interior Comfort
Bluetooth Audio
Mazda5_8BS1-EC-10J_Edition3 Page246
Monday, April 11 2011 3:41 PM
Form No.8BS1-EC-10J