Mazda 2012 3, Owner'S Manual

Page: 283 / 525

Black plate (282,1)
8. If it matches the registered code,
“
SR1 LOCK
”
appears for three
seconds which indicates that the code
input has been completed.
9.
“
SR1 LOCK 100
”
appears which
indicates that the parental lock is
activated. At this time, mute is on and
no sound is heard.
NOTE
l
If an ID code is not input for ten seconds,
“
Err
”
is displayed and it returns to the
former display.
l
Channel preset buttons 1, 2, 3, 4 and the
auto memory button or scan button (
)
are used for input of the ID code. Buttons 5
and 6 cannot be used.
Lock cancellation
Setting condition: SAT mode
NOTE
The scan button refers to the operation for an
In-dash CD changer-equipped vehicle, and the
auto memory button refers to the operation for
a CD player-equipped vehicle.
(Releasing a locked channel)
1. Select a channel to be released by
turning the manual tuning dial.
Example: Select the locked channel
(i.e. 100). At this time,
“
SR1 LOCK 100
”
is displayed.
(Registered ID code input preparation)
2. Press and hold the auto memory button
or scan button ( ), then press
channel preset button 6. Hold both
buttons together for 1.5 seconds.
3.
“
ENTER PIN
”
appears for three
seconds which indicates that it is in
code input mode.
4.
“
SR1 - - - -
”
appears, which indicates
that it is ready for code input.
(Registered ID code input)
5. Input the registered ID code using
channel preset buttons 1-4. Example:
When the registered ID code is
“
2323
”
,
input
“
2323
”
. At this time
“
SR1 2323
”
is displayed.
NOTE
If
“
Err
”
is displayed, go to the
“
INITIALIZATION OF ID CODE
”
section to
reset the ID code to [0000].
(Registered ID code input
determination)
6. Determine the input code by pressing
the auto memory button or scan button
(
).
7. If it does not match the registered code,
“
SR1 Err
”
is displayed and then it
returns to
“
SR1 - - - -
”
.
8. If it matches the registered code,
“
SR1 UNLOCK
”
appears for three
seconds which indicates that the code
input has been completed.
9.
“
SR1 100
”
appears which indicates that
the parental lock is off. At this time,
sound is heard.
NOTE
l
If an ID code is not input for ten seconds,
“
Err
”
is displayed and it returns to the
former display.
l
Channel preset buttons 1, 2, 3, 4 and the
auto memory button or scan button (
)
are used for input of the ID code. Buttons 5
and 6 cannot be used.
6-44
Interior Comfort
Audio System
Mazda3_8BY7-EC-11F_Edition1 Page282
Friday, June 17 2011 2:56 PM
Form No.8BY7-EC-11F