Mazda 2012 3 Owner'S Manual Download Page 332

Page: 332 / 525

Black plate (331,1)

NOTE

The applicable phrase appears in the
display.

After user voice registration is completed,
voice guidance

“

Speaker enrollment is

complete, returning to main menu

”

announced.

Voice recognition learning on/off

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep]

“

Voice training

”

Prompt:

“

Enrollment is enabled/

disabled. Would you like to disable/
enable or retrain?

”

Say:

[Beep]

“

Disable

”

“

Enable

”

5. When

“

Disable

”

is spoken, the voice

recognition learning is turned off.
When

“

Enable

”

is spoken, the voice

recognition learning is turned on.

Prompt:

“

Speaker Enrollment is

disabled/enabled, returning to main
menu.

”

When Bluetooth Hands-
Free Cannot be Used

Bluetooth Hands-Free cannot be used
under the following conditions:

The device is outside of the
communication area.

The device has a malfunction.

The device is not connected to the
hands-free unit equipped on the
vehicle.

The device's battery is weak.

The device is turned off.

The device is placed where radio
reception is difficult.

The ignition is switched off.

Interior Comfort

Bluetooth Hands-Free

6-93

Mazda3_8BY7-EC-11F_Edition1 Page331
Friday, June 17 2011 2:56 PM

Form No.8BY7-EC-11F

Summary of Contents for 2012 3














































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 3

Reviews:

Related manuals for 2012 3

Brands by name

Popular brands

Mazda 2012 3, Owner'S Manual

Search results

Summary of Contents for 2012 3

Reviews:

Related manuals for 2012 3

Brands by name

Popular brands