Mazda 2012 3 Owner'S Manual Download Page 438

Page: 438 / 525

Black plate (437,1)

3. Disconnect the bulb by pulling it out.

4. Install the new bulb in the reverse order

of removal.

Replacing Interior Light Bulbs

Overhead light (Front)/Map lights,
Overhead light (Rear), Vanity mirror
lights

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Overhead light (Front)/Map lights

Overhead light (Rear)

Edge

Vanity mirror lights

3. Install the new bulb in the reverse order

of removal.

Trunk light (4 Door)

1. Press both sides of the lens cap to

remove it.

Maintenance and Care

Owner Maintenance

8-55

Some models.

Mazda3_8BY7-EC-11F_Edition1 Page437
Friday, June 17 2011 2:57 PM

Form No.8BY7-EC-11F

Summary of Contents for 2012 3














































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 3

Reviews:

Related manuals for 2012 3

Brands by name

Popular brands

Mazda 2012 3, Owner'S Manual

Search results

Summary of Contents for 2012 3

Reviews:

Related manuals for 2012 3

Brands by name

Popular brands