Mazda 2005 mazda 3 Owner'S Manual Download Page 104

Page: 104 / 322

Black plate (104,1)

Before Getting In

Be sure the windows, outside mirrors,
and outside lights are clean.

Inspect inflation pressures and
condition of tires.

Look under the vehicle for any sign of
a leak.

If you plan to back up, make sure
nothing is in your way.

NOTE

Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. See
Maintenance, Section 8.

After Getting In

Are all doors closed and locked?

Is the seat adjusted properly?

Are the inside and outside mirrors
adjusted?

Is everyone's seat belt fastened?

Check all gauges.

Check all warning lights when the
ignition switch is turned to the ON
position.

Release the parking brake and make
sure the brake warning light goes off.

Always be thoroughly familiar with your
Mazda.

4-6

Before Driving Your Mazda

Before Starting the Engine

Mazda3_8T97-EC-04J_Edition1 Page104
Saturday, September 25 2004 2:9 PM

Form No.8T97-EC-04J

Ofrecido por www.electromanuales.com

Summary of Contents for 2005 mazda 3



































































































































































































































































































































Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands

Mazda 2005 mazda 3, Owner'S Manual

Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands