Mazda 2005 mazda 3 Owner'S Manual Download Page 227

Page: 227 / 322

Black plate (227,1)

Towing Description

We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.

Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.

A towed vehicle usually should have its
front wheels off the ground. If excessive
damage or other conditions prevent this,
use wheel dollies.

Wheel dollies

When towing with the rear wheels on the
ground, release the parking brake.

CAUTION

Don't tow the vehicle pointed backward
with driving wheels on the ground. This
may cause internal damage to the
transaxle.

CAUTION

Don't tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.

In Case of an Emergency

Emergency Towing

7-19

Mazda3_8T97-EC-04J_Edition1 Page227
Saturday, September 25 2004 2:15 PM

Form No.8T97-EC-04J

Ofrecido por www.electromanuales.com

Summary of Contents for 2005 mazda 3



































































































































































































































































































































Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands

Mazda 2005 mazda 3, Owner'S Manual

Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands