Mazda 2005 mazda 3 Owner'S Manual Download Page 272

Page: 272 / 322

Black plate (272,1)

5 Door

1. Remove the cover.

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

High-mount brake light

4 Door

1. Pull the center of each plastic retainer

and remove the retainers and the trunk
rear trim.

Removal

Installation

2. Disconnect the electrical connector

from the socket.

3. Turn the socket and bulb assembly

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

5. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

8-42

Maintenance and Care

Owner Maintenance

Mazda3_8T97-EC-04J_Edition1 Page272
Saturday, September 25 2004 2:17 PM

Form No.8T97-EC-04J

Ofrecido por www.electromanuales.com

Summary of Contents for 2005 mazda 3



































































































































































































































































































































Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands

Mazda 2005 mazda 3, Owner'S Manual

Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands