Mazda 2005 mazda 3 Owner'S Manual Download Page 270

Page: 270 / 322

Black plate (270,1)

Brake lights/Taillights(5 Door)

With LED bulb

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible.
The rear combination component must
be replaced.

With Non-LED bulb

1. Remove the cover.

Left side

Right side

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

Rear turn signal lights (5 Door)

1. Remove the cover.

Left side

8-40

Maintenance and Care

Owner Maintenance

Mazda3_8T97-EC-04J_Edition1 Page270
Saturday, September 25 2004 2:17 PM

Form No.8T97-EC-04J

Ofrecido por www.electromanuales.com

Summary of Contents for 2005 mazda 3



































































































































































































































































































































Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands

Mazda 2005 mazda 3, Owner'S Manual

Search results

Summary of Contents for 2005 mazda 3

Reviews:

Related manuals for 2005 mazda 3

Brands by name

Popular brands