13
N. PASSENGER SIDE HEADREST REMOVAL
1. Depress release button on left side factory guide sleeve
and remove headrest. (Figure 24)
2. Be careful not to strike headliner when removing
headrest from seat.
3. Set aside the headrest in a safe location.
Figure 24
O. POST GUIDE SLEEVE REMOVAL
1. From the 2nd row, unclip J-clip at the bottom of the seat
back.
2. Locate the zippers at the bottom of either side of the
seat. The zippers may be tie wrapped to the seat
harness. If so, cut the tie wraps to access the zippers.
3. Pull the zipper up with wrapped pliers until fully
unzipped. (Figure 25)
4. Disengage the 6 clips in the seat back that secure the
seat cover to the seat frame.
Note: Only the top 2 clips are included in the passenger
side seat for the Sport trim level
!
CAUTION - Gloves are recommended for steps 4
and 5 to avoid injury or cuts to your hands.
5. Reach up through the remaining seat material until you
can feel the bottom of the guide post sleeves.
6. Remove the head rest guide sleeves.
a. Press the locking tabs in at bottom of the post guide
sleeves on both sides of the LH post
b. Lift up and out of the seat and seat frame. (Figure 26)
7. Repeat steps 5 and 6 on the RH sleeve.
8. Discard the removed post guide sleeves.
Figure 25
Figure 26
J-Clip
Zippers
Tie Wrap (
if available)
a. Squeeze locking
tabs to release.
b. Lift to
release
