Mazak VTC-160A, Maintenance Manual, Page: 79 / 96

6-5
Input voltage 200V 220V
Power cable 38 mm
2
(0.6 in
2
) Power source
connection cables
(Ambient
temperature: 30°C
(86°F) or lower)
Grounding cable 22 mm
2
(0.3 in
2
)
6-2-3 Air Source Requirements
Pressure 5.0 - 9.0 kgf/cm
2
(71.2 - 128.1 PSI)
Minimum discharge Standard 140 L/min (4.942 ft
3
/min)
With air blast option 722 L/min (25.487 ft
3
/min)
Dew point
−
17°C (30.6°F) or lower (at atmospheric pressure)
Note: If the air has a high moisture content or if hot air is used, air actuators and equipment
could be damaged. In such cases, use an air dryer or similar equipment.
6-2-4 Items to Be Confirmed when Carrying the Machine
1. Machine dimensions
In order to carry this standard machine into your plant, the entrance of your plant must be bigger
than the dimensions indicated below:
Unit: mm (in.)
Dimensions Status Application
Type B
Normal dimensions
(Z-axis lowest position)
Overall width :2996 (117.95 in)
Overall height :2553.5 (100.53
in)
Crosswise :2855 (112.40 in)
Dimensions when the machine is
carried in/out by truck Dimensions after the followings are
dismounted:
・
Operation panel handle
・ Rear cover
Overall width :2939 (115.71 in)
Overall height :2553.5 (100.53
in)
Crosswise :2834.6 (111.60
in)
Return to Library