Mazak VTC-160A, Maintenance Manual, Page: 14 / 96

MAZATROL CNC CONTROLLERS PROVIDE PARAMETER SETTINGS TO LIMIT SPINDLE
RPM. THESE SETTINGS ARE BASED ON THE MAXIMUM SPEED SPECIFIED BY THE
CHUCK/ACTUATOR MANUFACTURER.
MAKE SURE TO SET THESE PARAMETERS ACCORDING TO CHUCK SPECIFICATION
WHEN INSTALLING A CHUCKING PACKAGE. ALSO, STAMP THE MAXIMUM SPINDLE
RPM ON THE CHUCK IDENTIFICATION PLATE LOCATED ON THE MACHINE TOOL
COVERS.
REFERENCE THE CNC PARAMETER MANUAL SUPPLIED WITH THE SPECIFIC MACHINE
TOOL TO IDENTIFY THE REQUIRED PARAMETERS TO CHANGE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO
THE MACHINE, SERIOUS INJURY OR DEATH.
IF ANY QUESTIONS EXIST, CONTACT THE NEAREST MAZAK SERVICE CENTER FOR
ASSISTANCE.
S-8
MAZAK MACHINES ARE ENGINEERED WITH A NUMBER OF SAFETY DEVICES TO
PROTECT PERSONNEL AND EQUIPMENT FROM INJURY AND DAMAGE.
DO NOT REMOVE, DISCONNECT, BYPASS OR MODIFY ANY LIMIT SWITCH, INTERLOCK,
COVER, OR OTHER SAFETY FEATURE IN ANY WAY, EITHER MECHANICALLY OR
ELECTRICALLY.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO
THE MACHINE, SERIOUS INJURY OR DEATH.
IF ANY QUESTIONS EXIST, CONTACT THE NEAREST MAZAK SERVICE CENTER FOR
ASSISTANCE.
WARNING !
WARNING !
Return to Library