4
Wave XL
|
User Instructions
Assembly instructions
Refer to Figure 1
1. Attach the Caddy handle to the Caddy base and fasten with the 4 screws and 4 nuts provided.
2. Attach the cable roller to its place, and fasten with 2 screws. Note the location of the connection
cable between power supply and cable roller.
3. Place the Dolphin Wave robot on the Caddy in front of the power supply as shown in Figure 1.
4. Connect the MMI communication’s cable to the power supply unit.
5. Connect the connection cable between power supply and cable roller.
MMI
Connection cable between
power supply and cable roller
Main power supply Cable
Cable roller
handle
Cable roller
Floating cable
Impeller cover
Floating cable
handle
MMI communications cable
Remote control unit
Power supply
AC cable holder
Figure 1: The Dolphin Wave
Roller inner connection
Caddy
