Maytag NDE2335AY Series, Service Manual

Page: 22 / 84

20 16026315
©2006 Maytag Services
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
Disassembly Procedures
WARNING
!
Motor/Blower/Thermistor/Thermostat
Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Front Panel.
4. Disconnect wiring from Moisture Sensor.
5. Remove three screws inside drum retaining Blower
Duct.
6. To remove Thermistor or Thermostat, disconnect wiring
from component(s) and remove retaining screws.
7. Remove nine screws retaining Blower Cover panel.