Maytag NDE2335AY Series, Service Manual

Page: 16 / 84

Component Testing Information
14 16026315
©2006 Maytag Services
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power and shut off gas to unit before servicing,
unless testing requires power.
Illustration Component Test Procedure Results
Thermistor
Unplug harness connector and test
from wire insertion side.
Pin #1 PK and Pin #11 PK of PS5.......
10000 ohms @ 77° F (25° C)
Door Switch Unplug connectors and test switch
terminals.
Door open terminals............................
Door closed terminals..........................
Infinity
Less than 1 ohm
Light Unplug connectors and test switch
terminals.
Check across terminals.......................
80 to 100 ohms
Motor
Unplug harness connector and test
motor circuits.
Pin #9 GY and Pin #9 Red (Windings).
2 ohms
Thermal Fuse
Unplug connectors and test
Thermostat terminals.
Check across terminals.......................
Less than 1 ohm
Hi Limit Thermostat
Unplug connectors and test
Thermostat terminals.
Check across terminals.......................
Less than 1 ohms
Thermal Cut Off Unplug connectors and test
Thermostat terminals.
Check across terminals.......................
Less than 1 ohm
Heater Element Unplug connectors and test Heater
terminals..............................................
10 ohms
Cycling Thermostat
146 °F Unplug connectors and test
Thermostat terminals...........................
Less than 1 ohm