Maytag NDE2335AY Series, Service Manual

Page: 19 / 84

©2006 Maytag Services
16026315 17
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
Disassembly Procedures
WARNING
!
Cycle Selector Knob (CSK) Removal
1. Disconnect power supply to unit.
2. Access Control Console, see “Control Console
Access / Facia Removal” procedure.
3. Remove PC Board.
4. Lift locking tab on CSK and rotate switch to remove.
Switch Removal
1. Disconnect power supply to unit.
2. Access Control Console, see “Control Console
Access / Facia Removal” procedure.
3. Remove ribbon connectors to switch.
4. Lift locking tab on switch and rotate to remove.
Top Cover / Door Switch / Front Panel /
Gasket Removal
1. Disconnect power supply to unit.
2. Use a plastic putty knife to depress the locking clip
between the Top Cover and Front Panel.
3. Disconnect wiring from the Door Switch.
4. Depress the locking tabs on switch side and remove
through the front.